Detailing Packages


 
5D_38562.png
 

Protection detail

cost: $295 - extra for larger vehicles

Customers that received our ceramic coating save $50

This treatment was designed for customers with limited time, well maintained vehicles. and coated vehicles. Either machine applied polishsealant combo that provides very light paint cleansing (no correction) and protection or a synthetic spray sealant is applied to ceramic coated vehicles. Then we seal the vehicle with a premium sealant or wax. This will last 2-4 months depending on storage, maintenance, weather, mileage and conditions

 

1. MULTI-STEP HAND WASH

  • Pre-rinse to remove heavy debris and road grime.
  • Pre-foam and let sit to loosen bonded contamination. 
  • Wheels, tires and fender wells safety degreased and cleaned with various wheel brushes. 
  • Engine bay thoroughly degreased and clean. Steam cleaning if necessary. 
  • Door jams, trunk jams, fuel fill area cleaned.
  • Two bucket hand wash using premium microfiber wash mitt for a swirl free finish.

       2. PAINT DECONTAMINATION

  • Paint, glass and wheels are soaked with IronX to remove embedded iron.
  • Clay bar is used to remove bonded contamination from paint, glass and lenses.

3. INTERIOR SERVICE

  • Floor mats removed, compressed air use to loosen dirt and debris.
  • Interior thoroughly vacuumed
  • All surfaces, HVAC and leather carefully cleaned and disinfected using 325 degree steam 
  • All surfaces including leather protected with a water-based UV inhibitor and hydrophobic protectant.  

4. SURFACE PREPARATION AND INSPECTION

  • Water is blown dry with heated air and soft microfiber towels
  • Final wipe down with isopropal alcohol to remove claying lubricate, waxes and sealants to exposed bare paint.
  • Vehicle is inspected thoroughly under our specialized paint refinement room using various LED lights.
  • Paint is measured using a paint depth gauge.    

5. SURFACE REFINISHING AND REFINEMENT. 

  • Paintwork is lightly cleansed using a polish/silica sealant product lasting 6-8 months. Moderate to heavy defect not removed.

6. FINAL PROCESS

  • We apply a silica(Si02) paint sealant lasting up to 6-8 months.
  • Wheels wiped and protected with a Silica sealant.
  • Window cleaned interior/exterior.
  • Door jams wiped and protected.
  • Tires protected with a water-based, none sling solution.
  • Final walk-around with our inspection light to ensure quality service.

Tier 1 Package 

cost: $495 - extra for larger vehicles

This package is designed for vehicles in good condition, new vehicles or a bi-annual service for vehicles that are not ceramic coated. Including our Level 1 Paint Correction to remove light surface defects. Finishing things off vehicle a thorough interior treatment and protection. 

1. MULTI-STEP HAND WASH

  • Pre-rinse to remove heavy debris and road grime.
  • Pre-foam and let sit to loosen bonded contamination. 
  • Wheels, tires and fender wells safety degreased and cleaned with various wheel brushes. 
  • Engine bay thoroughly degreased and clean. Steam cleaning if necessary. 
  • Door jams, trunk jams, fuel fill area cleaned.
  • Two bucket hand wash using premium microfiber wash mitt for a swirl free finish.

2. PAINT DECONTAMINATION

  • Paint, glass and wheels are soaked with IronX to remove embedded iron.
  • Clay bar is used to remove bonded contamination from paint, glass and lenses.

3. INTERIOR SERVICE

  • Floor mats removed, compressed air use to loosen dirt and debris.
  • Interior thoroughly vacuumed
  • All surfaces, HVAC and leather carefully cleaned and disinfected using 325 degree steam 
  • All surfaces including leather protected with a water-based UV inhibitor and hydrophobic protectant.  

4. SURFACE PREPARATION AND INSPECTION

  • Water is blown dry with heated air and soft microfiber towels
  • Final wipe down with isopropal alcohol to remove claying lubricate, waxes and sealants to exposed bare paint.
  • Vehicle is inspected thoroughly under our specialized paint refinement room using various LED lights.
  • Paint is measured using a paint depth gauge.    

5. SURFACE REFINISHING AND REFINEMENT. 

6. FINAL PROCESS

  • We apply a silica(Si02) paint sealant lasting up to 6-8 months.
  • Wheels wiped and protected with a Silica sealant.
  • Window cleaned interior/exterior.
  • Door jams wiped and protected.
  • Tires protected with a water-based, none sling solution.
  • Final walk-around with our inspection light to ensure quality service.
 

tier 2 package 

cost: $695 - Extra for larger vehicles 

Add C.Quartz C.Quartz Professional Ceramic Coating for $699
Add C.Quartz Finest Reserve Ceramic Coating for $1499

One of our most popular correction service. 2 steps of correcting to remove heavier defects that our level 1 service can't remove. Recommend for vehicle with moderate swirl marks, light wash scratches, micro marring, holograms and light water etching.  Finishing things off vehicle a thorough interior treatment and protection. 

1. MULTI-STEP HAND WASH

  • Pre-rinse to remove heavy debris and road grime.
  • Pre-foam and let sit to loosen bonded contamination. 
  • Wheels, tires and fender wells safety degreased and cleaned with various wheel brushes. 
  • Engine bay thoroughly degreased and clean. Steam cleaning if necessary. 
  • Door jams, trunk jams, fuel fill area cleaned.
  • Two bucket hand wash using premium microfiber wash mitt for a swirl free finish.

2. PAINT DECONTAMINATION

  • Paint, glass and wheels are soaked with IronX to remove embedded iron.
  • Clay bar is used to remove bonded contamination from paint, glass and lenses.

3. INTERIOR SERVICE

  • Floor mats removed, compressed air use to loosen dirt and debris.
  • Interior thoroughly vacuumed
  • All surfaces, HVAC and leather carefully cleaned and disinfected using 325 degree steam 
  • All surfaces including leather protected with a water-based UV inhibitor and hydrophobic protectant.  

4. SURFACE PREPARATION AND INSPECTION

  • Water is blown dry with heated air and soft microfiber towels
  • Final wipe down with isopropal alcohol to remove claying lubricate, waxes and sealants to exposed bare paint.
  • Vehicle is inspected thoroughly under our specialized paint refinement room using various LED lights.
  • Paint is measured using a paint depth gauge.    

5. SURFACE REFINISHING AND REFINEMENT. 

6. FINAL PROCESS

  • We apply a silica(Si02) paint sealant lasting up to 6-8 months.
  • Wheels wiped and protected with a Silica sealant.
  • Window cleaned interior/exterior.
  • Door jams wiped and protected.
  • Tires protected with a water-based, none sling solution.
  • Final walk-around with our inspection light to ensure quality service.

tier 3 package

Cost: $995 - extra for larger vehicles 

Add C.Quartz C.Quartz Professional Ceramic Coating for $699
Add C.Quartz Finest Reserve Ceramic Coating for $1499

This package combine with our Level 3 Paint Correction including 2 - 3 stages of correction and spot wet sanding to remove all severe swirl marks, light to medium scratches, holograms and buffer trails and light water etching. In the end you will be left with a perfectly scratch free finish with deep brilliant gloss.  Finishing things off vehicle a thorough interior treatment and protection. 

1. MULTI-STEP HAND WASH

  • Pre-rinse to remove heavy debris and road grime.
  • Pre-foam and let sit to loosen bonded contamination. 
  • Wheels, tires and fender wells safety degreased and cleaned with various wheel brushes. 
  • Engine bay thoroughly degreased and clean. Steam cleaning if necessary. 
  • Door jams, trunk jams, fuel fill area cleaned.
  • Two bucket hand wash using premium microfiber wash mitt for a swirl free finish.

2. PAINT DECONTAMINATION

  • Paint, glass and wheels are soaked with IronX to remove embedded iron.
  • Clay bar is used to remove bonded contamination from paint, glass and lenses.

3. INTERIOR SERVICE

  • Floor mats removed, compressed air use to loosen dirt and debris.
  • Interior thoroughly vacuumed
  • All surfaces, HVAC and leather carefully cleaned and disinfected using 325 degree steam 
  • All surfaces including leather protected with a water-based UV inhibitor and hydrophobic protectant.  

4. SURFACE PREPARATION AND INSPECTION

  • Water is blown dry with heated air and soft microfiber towels
  • Final wipe down with isopropal alcohol to remove claying lubricate, waxes and sealants to exposed bare paint.
  • Vehicle is inspected thoroughly under our specialized paint refinement room using various LED lights.
  • Paint is measured using a paint depth gauge.    

5. SURFACE REFINISHING AND REFINEMENT. 

6. FINAL PROCESS

  • We apply a silica(Si02) paint sealant lasting up to 6-8 months.
  • Wheels wiped and protected with a Silica sealant.
  • Window cleaned interior/exterior.
  • Door jams wiped and protected.
  • Tires protected with a water-based, none sling solution.
  • Final walk-around with our inspection light to ensure quality service.
 
 

new vehicle protection service

 
5D_38262.jpg

Buying a new vehicle? Let us help preserve that investment for years to come. Buying a new vehicle is very exciting, but worrying about what to do after you purchase it can be a intimidating task. We can help walk you through our process and what our New Vehicle Services can do for you and your vehicle.

Our New Vehicle Protection service is designed to further improve you vehicles appearance. You may ask, "it's brand new, it doesn't need much". While we wish this was true, unfortunately it's very far from it. A "new" vehicle has been handle many times through its newly created life. From the time it rolls out of the paint facility, to transportation to the ports, from the ports to the dealers, then the dealers may offer to "prep" the vehicle for you. While that may be convenient, the dealer does not have the required time and training in advanced car care. New vehicles will need some sort of paint correction to remove these inflicted defects, especially high-end and exotic vehicles. These vehicles are painted and or refinished by hand. Areas such as debris in the clear coat, sand marks, buffer trails, DA sanding marks etc are often over-looked or not fully removed due to time restrictions. For the normal mass produced vehicles this isn't as common although they still will go through dealer prep, lot washes, wipe downs etc.

Surface protection both interior and exterior is key right from the start! Your interior will need attention both with cleaning and protection. Interior surfaces such as leather and plastic are very susceptible to UV damage, spills, dirt and debris. We have specialized coating for all areas of your interior. Same goes for the exterior with added hazards such as road debris, bird droppings, bumps and scraps, rock chips and natural elements. After our techs perfect your vehicles paintwork, we then shift our focus towards what is the most important aspect about this service. Protecting that rolling piece of art! We high recommend adding one of our tailored paint protection kits. This will protect the nose and other areas of your vehicle from rock chips, light scrapes, scratches, road debris and other environmental elements. Pair this with one of our CQuartz ceramic coatings for ease of cleaning your vehicle. Ceramic coatings are design to be super hydrophobic meaning this will bead and shed water from the surface. Repealing loose dirt and debris meaning less scrubbing when washing which in turn will keep your vehicle looking great for longer. Ceramic coatings increase your vehicles surface hardness making it less susceptible to wash induced marks. Also protecting from harsh chemicals, bird droppings and water spotting. 

A lot of our clients will inform us ahead of time before purchasing or taking delivery so we can help advise them what they should look for or request. We always suggest if ordering a vehicle to advise the dealer not to remove the transport plastic. That way both our clients and us know we will be the first to touch the vehicle and that the dealer has not wash or prep it.  Or if you choose to have the dealer remove the plastic to only do just that. Although when buying a new vehicle off the lot or having it shipped in from another dealer it may have already gone though their process and that what our New Vehicle Services is design for!

 
 

base new
vehicle service

level 1 paint correction

Interior leather,carpets & plastics protected

windshield and glass coated

Xpel partial nose coverage

synthetic paint sealant applied

cost starting at $1499

advanced
new vehicle service

Level 2 paint correction

Interior leather, carpets & plastic protected with ceramic coatings

Windshield and glass coated

Xpel partial nose coverage

CQuartz professional coating applied
to paint, film, lenses & trim

cost starting at $2399

premium
new vehicle service

Level 2 paint correction

Interior leather, carpets & plastic protected with ceramic coatings

Windshield and glass coated

Xpel full nose coverage

Wheel Off protection

CQuartz finest reserve coating applied to paint, film, lenses & trim

cost starting at $4399

 
 

additional services

 
5D_39226.png
 

Wheel off protection

cost: $350

Cleaning and maintaining your wheels can be a daunting task. With more aggressive brake pads on higher-end performance machines means more brake dust thus keeping your wheels protected is important. Brake dust is corrosive and the longer left on your wheels the more it can eat away at the finish. Our wheel off service is designed to clean, polish and protect your wheels for easier cleaning. Also included in this service is cleaning suspension components, brake rotors and calipers, and fender wells. Once your wheels are polished, we apply a high temp ceramic coating via spray gun to wheel faces, inner wheel and calipers. Your wheels are re-torqued to factory specifications twice, once when wheels are mounted and second right before the vehicle leaves our facility. 

 

Motorcycle Packages

 
5D_399571.jpg

please call to ask about our motorcyle packages